Neue Produktversion

IEC 62893-2 EV Charging Cable Testing: Test Methods & Equipment Guide

2026-08-31 13:33:01
admin

A practical engineering guide to IEC 62893-2 EV charging cable testing, covering eight electrical, environmental, chemical and mechanical test areas, failure mechanisms, laboratory setups and equipment selection.

View Detail

ASTM D3165 Testing Guide: Lap Shear Testing for Laminated Assemblies & Equipment Selection

2026-08-31 11:45:55
admin

ASTM D3165 laminated assembly lap shear testing solution, focusing on large-area bonded joints, production quality control, load alignment, test result analysis, and test system selection using the RS-8010A and RS-8000.

View Detail

ASTM D5656 Testing Guide: Shear Stress-Strain Measurement & Equipment Selection

2026-08-31 10:14:16
admin

ASTM D5656 structural adhesive shear stress-strain testing solution, covering thick-adherend specimens, local shear strain measurement, differences between D5656 and D1002, common testing errors, and test system selection using the RS-8000 and RS-8000GDW.

View Detail

YD/T 1539-2006 Mobile Phone Reliability Testing: Requirements, Test Methods & Equipment

2026-08-28 17:53:15
admin

A practical guide to YD/T 1539-2006 mobile phone reliability testing, covering its relationship with YD/T 1539-2019, mechanical and environmental test methods, controlled drop vs. tumble testing, pass/fail evaluation, and equipment selection.

View Detail

IEC 60227 Cable Testing Guide: Flexing, Bending & IEC 63294 Explained

2026-08-28 15:59:51
admin

A practical guide to IEC 60227 cable testing and the transition from IEC 60227-2 to IEC 63294:2021. Learn how flexing and bending tests work, what affects test severity, common cable failure modes, electrical fault detection, and how to select the right testing equipment for flexible PVC cables and power cords.

View Detail

ASTM D3163 Lap Shear Testing: Test Setup, Grips & Machine Selection

2026-08-28 12:05:42
admin

ASTM D3163 testing evaluates adhesively bonded rigid plastic lap joints under tensile loading. This guide covers specimen preparation, loading rate, lap-joint alignment, grip selection, apparent shear strength calculation, common testing problems, failure evaluation and universal testing machine selection for plastic adhesive applications.

View Detail

Helpful links

About ITM

Follow us